Home>Consumer Electronics>12/24V Car Battery Tester HD Color Screen Internal Resistance Tester CCA Battery Analyzer Battery Detector Car Inspection Tools

12/24V Car Battery Tester HD Color Screen Internal Resistance Tester CCA Battery Analyzer Battery Detector Car Inspection Tools Item NO.: 1005005980453345

US$ 26.72

Quantity: Stock ( )

Product Name	12/24V Car Battery Tester HD Color Screen Internal Resistance Tester CCA Battery Analyzer Battery Detector Car Inspection Tools
Item NO.	1005005980453345
Weight	0.612 kg = 1.3492 lb = 21.5877 oz
Category	Consumer Electronics
Creation Time	2023-10-14

12/24V Car Battery Tester HD Color Screen Battery Analyzer Multi-language Battery Detector Battery Checker Auto Inspection Tools

Feature:
1. 6V/12V/24V Digital Battery Tester: The car battery tester is an essential tool for automotive maintenance. It can test 6V, 12V, and 24V lead-acid batteries with a capacity of 100 to 2000 CCA. It is compatible with various battery types such as conventional flooded, AGM flat plate, AGM spiral, and gel batteries commonly used in motorcycles, cars, light trucks, boats, and more. It follows battery standards such as CCA, BCI, CA, MCA, DIN, IEC, EN, JIS, GB, and SAE. It provides a quick, accurate, and cost-effective solution for technicians to check battery conditions.
2. Kelvin Four-Wire Sensing Method: This voltage tester adopts the Kelvin four-wire sensing method, providing more accurate test results. It performs battery tests, starting tests, charging tests, and load tests on your vehicle to analyze the overall health of the battery, including internal resistance, voltage, State of Health (SOH), State of Charge (SOC), and CCA value. It is perfect for automotive service technicians, as well as home/commercial vehicle maintenance and repairs.
3. Pre-Test Preparation: If the car is running, turn off the engine and rotate the key to the "OFF" position.
4. Battery Testing: Operation Steps of Accurate Testing: Connect the test clamps to the positive and negative terminals of the battery. Select the interior test item using the keys, then press Enter. Choose the battery test item using the keys, then press Enter. Select the battery type. Use the keys to choose the corresponding type, then press the key to select. Based on the battery's standard, use the keys to choose the test standard. If the battery follows the "JIS" standard, you can directly input the CCA (if known). Adjust the battery analyzer reference standard value using the keys based on the standard value indicated on the battery or press and hold keys for continuous adjustment. Once the standard value is adjusted, press 0K to start the test. Use the keys to view the State of Health (SOH) and State of Charge (SOC) of the battery, respectively.
5. Charging System Testing: Pre-Test Preparation: If the car is turned off, start the engine first. Operation Steps:When the car is running, connect the test damper to the positive and negative terminals of the battery (there is no distinction on this device, you can connect arbitrarily). Ensure proper contact. Press the keys to select the charging test item, then press Enter to start the test. Enter the ripple test interface. The smaller the waveform fluctuation, the more stable the voltage. Wait for 10 seconds in the ripple test interface. The internal resistance tester will prompt "> Charging Test."

Specification:
Certification: NONE
Origin: Mainland China
Size: 190 x 90 x 26mm/7.5 x 3.5 x 1.0inch
Screen size: 2.8" HD colour screen
Suitable for: 6V/12V/24V batteries
Key features: reverse connection test, battery health test, start-up test, charge test, load test, ripple test, battery life and power test, waveform monitoring, waveform playback, 10 waveform records, screenshot function, theme selection, battery multimeter
Supports 11 languages: English, Spanish, French, German, Italian, Polish, Portuguese, Russian, Japanese, Chinese, Traditional Chinese.
Features: free updates for life
Tests a wide range of battery types: conventional liquid-rich, AGM flat, AGM screw, EFB and GEL
Testing standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
Test data: SOH, SOC, CCA values, CCA ratings, voltages, multimeters, etc., with test results in less than a minute
Support a variety of global battery standards, can test almost all automotive starter lead-acid batteries, a wide range of applications:
EPS lead-acid batteries;
Automotive starting batteries;
AGM/EFB start/stop batteries;
Electric vehicle batteries;
UPS lead-acid batteries;
Colloidal batteries;
Note: UPS batteries / EV batteries / motorbike batteries can only measure internal resistance / power / voltage, not battery life.
Battery test: The battery test is used to check and analyse whether the battery is in good condition.
Charging test: The charging test is used to check and analyse the state of the charging system (generator, rectifier, rectifier diode, etc.).
Starter test: The starter test is used to test and analyse the current and voltage required to actually start the motor to verify that the starter motor is working properly.
Load test: The load test is used to check and analyse whether the battery has sufficient load capacity to run all power-using devices, such as playing car music, etc.
Support for charging system ripple test: read real-time voltage changes in the graph at the touch of a button. The waveform shows the current voltage, the maximum and minimum voltage during ignition. It can also save 10 waveform monitoring records, play back saved waveform data and clear all saved waveform data with one touch; its record management can only record the results of the last battery test.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.