EIBOS 3D Filament Dryer Storage Box 45W PTC Heater Fan Temperature Control 1.75mm 2.85mm 3.0mm for Nylon PVA PLA PETG TPU Item NO.: 3256804201322623

Features:

【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying a 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposure. The filament can be used while in the box, the dryer function as both a storage box and filament holder. Sealed protection, comprehensive dust-proof and damp, no impurities. When unplugged, you can place 2 desiccants in the lower left and upper right corners of the box to reduce the humidity of the printing filament, and use it as a printing filament storage box.

【ADJUSTABLE TEMPERATURE MONITOR】Adjust the temperature knob to the appropriate position to accommodate the needs of various filaments. (NOTE: A76/LR44 button battery ALREADY included) You can grasp the working time according to the type of printing filament material or your needs. Equipped with an individual humidity sensor, measurement range from 10%-99%, real-time data will be indicated by the LCD monitor

【COMPATIBLE WITH MULTIPLE SPOOLS】works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, Wood, ABS, etc. Space allows usage 1 roll of 1kg filaments, allowing the filament to continuously rotate in a dry hot box to remove moisture(Note: for Single Spool-220x72mm(H*W)

【REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament or even making it better than the brand new unit. No plastic strings and clogging, no need to worry about your old left out spools, this dryer box can help revive them easily

【45W PTC HEATER & 65°C MAXIMUM TEMPERATURE】Different from others using ordinary heater PI heating pad to heat the space, the maximum temperature can only reach 55℃. Our product uses a 45W PTC heater to reach the maximum temperature of 65℃, which is more durable, more energy-saving, more environmentally friendly, and makes the filament dry more evenly. In addition, the built-in fan is designed to circulate the hot air in the filament drying box, so that the drying system can better remove moisture

Product Parameter:

Input： AC 110V or 220V 50/60Hz
Rated power：45W
Product size：225x225x103mm Net weight：1kg
Package size：265x265x135mm Total weight：1.5kg
Humidity range： RH10%~99%
Temperature range：40~65℃
Spool size：<φ220x72mm
Inner size：>φ50mm
Filament size：1.75/2.85/3mm

Package containing:

Filament dryer x1,
Power cord x1
User Manual x1

FAQ:1. How it works?

Promoting the evaporation of water molecules by heating to ensure the 3D Printing Filaments are in the best condition.
>Put the filaments in.
>Turn on the button.
>Choose the relevant filament .
>Enjoy your print.

2.[Fan]Is the fan included in the Easdry?

Yes,fan is included,we have using a fan here to accelerate the heating speed inside of the dryer.in addition,Easdry also carry an air excelent circulation system,with the help of the fan,it will effcetively remove the moisture inside.

3.[Temperature sensor]Is the Temperature sensor included in the Easdry?

NO.there is no temperature inside of the easdry.we have did a lot of the test to make sure the temperature in the filament area will be evenly reach the most suitable temperature for the different type of the filament.During test,we have used Laboratory-grade Infrared Thermometer to make sure the temperature and we have attached some photo and video as reference.the result is pretty obvious from our prespective.w
we have already set up the drying temperature for the different type of filament,we believe this will be the easest for the users to finish their setting.

4.[Structure]Can i see the filament inside of the Easdry?

Yes.the'door'of the easdry is transparent.the condition of the filament can be monitored there.