YONGNUO Wireless TTL Flash Trigger YN622 YN-622C II C-TX KIT with High-speed Sync HSS 1/8000s for Canon Camera 500D 60D 7D 5DIII

Yongnuo YN-622C RX：

Works with:

Compatible with ALL YongNuo/ Canon EXII series flashes，and strobe flashes.

Compatible with 5D Mark III

Compatible with new speedlite 600EX RT

Campatible with 1100D 1000D 650D 600D 550D 7D 5DII 5DIII 1DIV 1DIII 5D 1D 1DII 10D 20D 30D 40D 50D

Overview:

YN-622C E-TTL wireless flash trigger is a high per formance  master  and  slave  equipment  of  multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effectscan be realized through setting your flash at 360 degrees.It design of transceiver, the distance of remote control reaches 100M, suppor ting 7 wireless channels and A/B/C three groups.

Remotely change the modes and parameters of the flash quickly when using the Canon EOS series DSLR cameras which suppor ts external flash function , such as T TL ratio or  manually set each group of flash output. Support high-speed  sync, the max sync speed is 1/8000s*,Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter.

Functions:

YN-622C 2 transceivers kit consist two similar transceivers,  support  one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make  them into an application form of multiple-flashes,  number of the receivers is not limited.

• Compatible flash mode: E-TTL (II)/ Manual/ Multi

• Compatible Shutter sync: 1st curtain, 2nd curtain,high speed sync (HSS/FP), Max 1/8000s sync speed

• Control remote  flash  using  camera's flash control menu screen(Remote Control Mode)

• Support E-TTL / Manual/ Multi flash mode mix using(Mix Control Mode)

• Flash on hot-shoe of transmitter supports ETTL

• Support Flash Exposure Compensation (FEC)

• Support Flash Exposure Bracketing (FEB)

• Support Flash Exposure Lock (FEL)

• Support modeling FlashSupport E-TTL group ratio (ALL/ A:B/ A:B C)

• Support Manual/Multi group (ALL/ A:B/ A:B:C)

• Support flash zooming (auto, manual)Support AF assist beam emitter(AF Lamp)

• Support PC port triggering strobe flashes and support 1st, 2nd cur tain/HSS (Super Sync)

• Support LCD Live view triggering

• Support high-speed continuous shooting trigger

• Settings saved automatically

• Compatible  with  ALL  YongNuo/  Canon  EXII  series flashes

• Suppor t single-contact of camera & flash triggering

YongNuo YN-622C-TX：

Campatible List:

• Campatible camera: Canon EOS Series DSLR

• Cameras compatible with the shutter release cable (parts):

• LS-2.5/C1: 60D, 70D, 400D Series, 500D Series, 600D Series, 1000D Series

• LS-2.5/C3: 40D, 50D, 7D, 1D Series, 5D Series

• Supported Functions List:

• LCD Screen display, and multi-buttons for quick operation

• The firmware can be upgraded through the USD interface

• Supports wireless shutter release function

• The focal length(zoom) of the A/B/C three groups flash can be adjusted separetely

• Support TTL ratio A:B / A:B:C

• AF-assist beam emitter function (can be disabled)

• Flash mode: GR(grouping flash)/E-TTL(II)/Multi flash

• Supports mixed use of E-TTL(II) Mode, manual flash model or super sync(SS) of A/B/C group flash

• The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately

• Shutter Sync: 1st-curtain sync, 2nd-curtain sync and high-speed sync, the highest sync speed is 1/8000s

• Supports FEC, FEB, FEL

• Supports modeling flash

• Support the flash zooming(auto, manual)

• Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows

• Settings saved automatically

• The flash sync signal can be input through the PC port

• Supports the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (Non canon body)

The above functions need to be used with the YN-622C transeiver. Parts of funtions may refer to manufacturer of the camera and flash (FEL, Modeling Flash)

Specifications:

• System type: Digital FSK 2.4GHz wireless controller

• Distance: 100M

• Channel: 7

• Flash mode: GR(E-TTL(II), manual, Super Sync)/E-TTL(II)/Multi flash

• Sync mode: 1st-curtain, 2nd-curtain, High-Speed Sync(HSS)

• Groups: 3Groups(A/B/C)

• Max Sync Speed: 1/8000S

• Trigger Interface: Hot-Shoe, PC port

• Shutter  release interface: 2.5MM Shutter release interface

• TTL Ratio: Support

• USB Firmware Upgrade: Support

• AF Assist Beam Emitter: Support

• Zoom: Support

• Battery: AAx2

• Stand-by time: 120h

• Dimensions: 89.5 x 53 x 39mm

• Weight:82g

• 
  

YONGNUO YN622C II-RX:

Works with:

Compatible with ALL YongNuo/ Canon EXII series flashes，and strobe flashes.

Compatible with 5D Mark III

Compatible with new speedlite 600EX RT

Campatible with 1100D 1000D 650D 600D 550D 7D 5DII 5DIII 1DIV 1DIII 5D 1D 1DII 10D 20D 30D 40D 50D

Overview:

YN-622C E-TTL wireless flash trigger is a high per formance  master  and  slave  equipment  of  multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effectscan be realized through setting your flash at 360 degrees.It design of transceiver, the distance of remote control reaches 100M, suppor ting 7 wireless channels and A/B/C three groups.

Remotely change the modes and parameters of the flash quickly when using the Canon EOS series DSLR cameras which suppor ts external flash function , such as T TL ratio or  manually set each group of flash output. Support high-speed  sync, the max sync speed is 1/8000s*,Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter.

Functions:

YN-622C 2 transceivers kit consist two similar transceivers,  support  one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make  them into an application form of multiple-flashes,  number of the receivers is not limited.

• Compatible flash mode: E-TTL (II)/ Manual/ Multi

• Compatible Shutter sync: 1st curtain, 2nd curtain,high speed sync (HSS/FP), Max 1/8000s sync speed

• Control remote  flash  using  camera's flash control menu screen(Remote Control Mode)

• Support E-TTL / Manual/ Multi flash mode mix using(Mix Control Mode)

• Flash on hot-shoe of transmitter supports ETTL

• Support Flash Exposure Compensation (FEC)

• Support Flash Exposure Bracketing (FEB)

• Support Flash Exposure Lock (FEL)

• Support modeling FlashSupport E-TTL group ratio (ALL/ A:B/ A:B C)

• Support Manual/Multi group (ALL/ A:B/ A:B:C)

• Support flash zooming (auto, manual)Support AF assist beam emitter(AF Lamp)

• Support PC port triggering strobe flashes and support 1st, 2nd cur tain/HSS (Super Sync)

• Support LCD Live view triggering

• Support high-speed continuous shooting trigger

• Settings saved automatically

• Compatible  with  ALL  YongNuo/  Canon  EXII  series flashes

• Suppor t single-contact of camera & flash triggering

• 
  

• YONGNUO 622C Kit:

• Specification
  The YN-622C-TX transmitter acts as a master control unit to the popular YN-622C E-TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface.
  Also adding a USB port for firmware updates, which is major advantage over the current triggers. The improved YN-622C-TX also enhances stability, as well as improving information transmission speeds.
  
  Yongnuo YN-622C Wireless TTL Flash Transeiver / Flash Trigger Supports High-speed Sync HSS for Canon Flash Speedlite Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL ( II ), Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres. It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.
  
  Suit for Camera:
  A: The EOS DSLR camera with external flash control menu: Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D/XTi 450D/XSi 500D/T1i 550D/T2i 600D/T3i 650D/T4i 1000D 1100D
  
  B: The EOS DSLR Camera without external flash control manual: Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II
  
  Compatible ETTL Flash: ( It suport wireless remote control through camera menu ) Canon 600EX ( RT ), 580EX II, 550EX,540EX, 430EX II, 420EX Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, ( Yongnuo flash units don't support HSS Function ) Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.